Hardware case
for an automated workstation
A specialized enclosure for the customer to build a workstation. Interior space for user equipment, UPS400 and the BA 27400-25.2-001 battery pack for autonomous operation.
Enclosure protection in transit per GOST 14254-2015
Maximum total load when UPS and battery are installed
Design service life of the monolithic unit
Design
Exterior, compartments and control panel
Power system
The housing has input and output mains connectors. Installing a UPS and battery together enables autonomous operation.
Input connector (plug) with switch: ~230 V, 50 Hz — customer equipment and UPS when present
Output connector (socket) “~230 V” — external devices
DC 20.9–29.4 V for installed equipment
“24 V” connectors for external loads
USB Type-A for charging mobile devices
Build
A monolithic container with two end covers.
Covers lock with eight tension latches each (three top and bottom, one per side) and two folding carry handles.
One cover opens a two-section bay: UPS and battery on the left, customer equipment on the right. The opposite cover is storage for portable gear.
High-strength polyethylene shell with stiffening ribs. Use standalone or as part of customer equipment.
Control panel
Illuminated switches above each connector (pos. 1)
24 V automotive socket (pos. 2)
Remote UPS status indicators (pos. 3)
Battery start button for autonomous mode (pos. 4)
“~230 V Output” pass-through socket (pos. 5)
“~230 V Input” with key switch (pos. 6)
Wago 236-401 with polarity (pos. 7)
USB Type-A for mobile charging (pos. 8)
Main technical specifications
| Parameter | Value |
|---|---|
| ~230 V input connector | AC-16FL plug |
| ~230 V output connector | MAGNUM 2P+PE socket |
| Max current ~230 V in / out | 16 A* |
| 24 V connectors | Wago 236-401-8; automotive 24 V socket |
| Max current Wago 236-401-8 | 24 A** |
| Max current 24 V socket | 16 A** |
| Max current USB Type-A | 2.1 A** |
| Indicator current (4 channels) | 12.5 mA at (12.0±0.5) V |
| IP rating | IP 65 |
| Dimensions (L × W × H) | 1019 × 606 × 347 mm |
| Mass | 50 kg max |
* “~230 V input” and “~230 V output” are galvanically linked. Combined current must not exceed the input rating.
** With UPS and battery installed, total UPS load must not exceed 400 W.
Need a hardware case for your task?
Our engineers will match UPS, battery and power layout to your equipment.
Hardware cases and mobile AWS: purpose and functions
Engineering TiM’s specialized hardware case is a unified platform for the customer to assemble an operator’s automated workstation. Defence enterprises and security-system integrators can buy a hardware case in Minsk directly from the developer. The chassis is adapted for communications gear, EW complexes and telemetry collection systems.
Structurally the mobile complex is a shock-resistant monolithic container with two-sided access for use in mobile shelters or as an autonomous field control console. The product withstands hard mechanical and climatic loads:
a high-strength polyethylene outer shell with stiffening ribs evenly distributes impact energy, protecting the instrument frame during transport on armored vehicles;
multi-level vibration isolation of the interior neutralizes dynamic overloads and protects electronic components;
IP65 enclosure protection per GOST 14254-2015 keeps out dust and water jets in transit;
two removable end covers with sixteen tension latches ensure sealing on the move and quick access on site;
the power bay is sized for a backup uninterruptible power supply up to 400 W with 230 V AC pass-through up to 16 A.
Modifications and equipment configurations
The interior is divided into functional zones. On the front face is a two-section bay: power units in one section, customer target devices in the other. The opposite end holds a drawer-type storage bay for portable modules, cable reels and sensors.
The front panel provides centralized interconnection:
230 V power connectors (AC-16FL inlet plug and MAGNUM 2P+PE outlet) for pass-through supply of third-party devices;
Wago 236 terminals and an automotive socket for DC equipment at 20.9 to 29.4 V;
USB Type-A connectors up to 2.1 A for powering and charging portable devices;
panel toggles and status indicators, including a power-block parameter display;
integration of battery BA 27400-25.2-001 with a cold-start button; in the field the battery can be recharged from a portable petrol or diesel generator.
Production and assembly of hardware cases to order in Minsk
Engineering TiM performs engineering preparation, customization and delivery of protected enclosures for a specific project. Designers calculate two-section bay layout, chassis balance and thermal parameters for the customer’s radio-electronic subassemblies.
Advantages of Engineering TiM solutions:
structural reliability and stable operation in extreme conditions with a design service life of at least 10 years;
exact match of electrical routes, connectors and mounting points to the agreed specification;
individual adaptation of mounting panels to non-standard controller and instrument sizes.
How to order a hardware case in Belarus: terms and delivery
Work with design institutes, security agencies and enterprises follows a clear process:
Agree customer equipment list, current loads and interface requirements.
Design internal mounting and cable routing.
Fit electrical hardware, insulation testing and bench checks.
Acceptance inspection and delivery of the equipment batch.
Final price is based on the approved specification and depends on the components used. By placing an order you receive a proven platform with an official warranty in Belarus.
To agree a specification, bay layout and a commercial proposal, contact the engineers.